Load Bearing Wall Removal

Load Bearing Wall Removal in Sheffield

Fancy a bigger, brighter, more open home? Or a better layout for your rental property? If a wall is in the way, we can usually do something about it, even when it’s holding the house up.

Newbould Developments are load bearing wall removal specialists in Sheffield, with over 20 years’ experience and more than 100 walls removed. Our own team looks after the whole job, from the first look at the wall to the final coat of paint, so you only have one company to deal with.

Sheffield Load Bearing Wall Specialist

Looking for a load bearing wall removal contractor you can trust? Taking out a wall that supports your home isn’t a job for a general handyman, and it isn’t something to guess at. It needs the right know-how and the right support in place before anything comes down. That’s where our experience counts.

We’re a family run company and one of Sheffield’s longest established property renovation firms. Here’s what you get when you choose us:

• 20+ years’ experience renovating homes and rental properties across Sheffield
• 100+ load bearing walls removed, from small openings to full open-plan knock throughs
• Everything in-house: builders, joiners, plasterers, electricians and plumbers, all working as one team
• The technical side taken care of, including the structural calculations and Building Regulations paperwork
• Neat, tidy work, with your space left clean and ready to enjoy
• Honest advice, including telling you if a wall can stay

Internal Load Bearing Wall Removal

Internal load bearing wall removal is our bread and butter. Plenty of homes in Sheffield have inside walls that carry the floor, ceiling or roof above, and they’re often the very walls standing between you and the layout you want. Typical jobs include:

• Opening up the kitchen, dining room and living room into one social space (see our kitchen knock through service)
• Widening a doorway or creating a new opening between rooms
• Removing a wall to make a bigger bedroom, bathroom or hallway
• Taking out a chimney breast and the structural support that goes with it
• Knocking walls through as part of an extension

Not sure whether your wall is load bearing? You don’t need to work it out yourself. We’ll take a look and tell you straight. Please don’t start knocking anything down before you’ve had it checked.

Load Bearing Wall Removal Options

There isn’t just one way to do it. The best choice depends on what’s above the wall, how your home is built and what you want the finished space to look like. We’ll talk you through what’s possible. These are the main options:

Option	What it means
Full wall removal	The wall comes out completely and a beam carries the load. This gives you the biggest, most open space.
Partial removal	Part of the wall stays and a wide opening is created. A good middle ground if you want to keep some separation between rooms.
Beam hidden in the ceiling	The beam sits inside the ceiling depth for a clean, flat finish with nothing hanging down.
Beam below the ceiling	A beam that can be seen, which is sometimes the simplest route. It can be boxed in neatly or left as a feature.
Posts or columns	Support at the ends or in the middle of an opening, sometimes used where a very long span is needed.
Keeping the wall	If removing it isn’t practical, we can often add a doorway or archway instead. We’ll always be honest about what makes sense.

Load Bearing Wall Removal Beam

When a load bearing wall comes out, a beam takes over its job. Steel is the most common choice because it’s strong and slim, which means a smaller beam and less impact on your ceiling. In some cases an engineered timber beam works well too.

The right beam for your home is worked out for your property specifically, so it’s the correct size and sits on proper supports at each end. The house is held safely while the work is done. Once the beam is in, it’s protected and finished neatly. Our in-house plasterers will make good the walls and ceiling, so it looks like it was always meant to be that way.

Basement Load Bearing Wall Removal

Lots of Sheffield homes have a cellar or basement, and the walls down there often do the heaviest lifting in the whole house. That makes basement load bearing wall removal a job that needs real care, and it’s something we do regularly.

Opening up a basement can turn dark, cramped rooms into one usable space, whether you’re planning a games room, gym, utility room or extra living space. Because we also carry out specialist basement conversions, we can look after the whole project, including the things that matter below ground:

• Supporting the house above while the wall is removed
• Damp proofing and tanking so the finished space stays dry
• Making the most of light, airflow and heating
• Finishing the space properly, ready to use

Load Bearing Wall Removal for Landlords

If you own rental property, a better layout can mean a more lettable home. We work with landlords and agents across Sheffield and we understand that time between tenants costs money. See our landlords and agents page for more.

• One reliable team for the wall removal, plastering, decorating and any electrical or plumbing changes
• Tidy, professional work that leaves the property ready to let
• Straight answers on what’s possible in your property type

If your property is an HMO or has several tenants, tell us when you get in touch. Changing the layout can affect things like fire safety and escape routes, and we’ll make sure that’s considered from the start.

One of our landlord customers says we work in a “cost effective, professional and courteous manner” and are “extremely reliable”.

Simple From Start to Finish

We keep things straightforward:

• We take a look. We visit, check the wall and talk through your options.
• We sort the technical bits. Structural calculations and paperwork are taken care of for you.
• We do the work and tidy up. From taking the wall out to finishing the surfaces, our own team does it all.

See Our Work

We’ve opened up homes of all shapes and sizes across Sheffield. Take a look at our portfolio for recent kitchen knock throughs, conversions and more, and see what our customers say.

Load Bearing Wall Removal FAQs

How do I know if a wall is load bearing?

It’s hard to tell just by looking. Clues include thick walls, walls running across the floor joists, or walls sitting directly above or below another wall. The only safe way to know is to have it checked, so give us a call and we’ll take a look.

Do I need Building Regulations approval?

Yes. Removing a load bearing wall in England needs Building Regulations approval. We take care of this as part of the job, so you don’t need to worry about the paperwork.

Will it be messy?

Any wall removal creates some dust, but we protect your home and keep it under control. We clean up as we go and leave everything tidy when we’re done.

Can you remove a load bearing wall in a basement?

Yes. We remove load bearing walls in basements and cellars, and we can also handle the damp proofing, tanking and conversion work if you want to make the space usable.

Do I have to move out while the work is done?

Most customers stay put. Some rooms may be out of action for a while, and we’ll talk through what to expect before we start.

Talk to a Load Bearing Wall Removal Specialist

Ready to open up your home or rental property? For friendly, honest advice from one of Sheffield’s longest established property renovation companies, get in touch today.

Call 0114 407 0142 or click below to get a quote by email.